0086-523-89612116wanglongmachine@gmail.com

PRODUCTS You are here : Home / Products

PRODUCTS

Tungsten Carbide Alloy Powder 

Tungsten carbide alloy powder has excellent properties of low stress mill grain and abrasion resistance, but impact performance has dropped, it has good properties of high temperature oxidation resistance and corrosion resistance, difficult on machining, commonly used in the requirements of mill grain and abrasion occasions, such as: plates, scraper, fan blades, screw conveyer and conveyer shaft.

Main Technical Parameter:

Powder HRC Chemicalomposition (weight%) Typical Application
WL-WC1 65 50% Deloro60+50% casting WC Mixer blades, scraper and fan blades.
WL-WC2 62 65%Deloro60 +35%  casting WC Screw propeller and conveyance shaft.
WL-WC3 62 85% Deloro60 + 15% casting WC Screw propeller and conveyance shaft.
WL-WC4 65 40% Deloro60+60% casting WC Mixer blades, scraper and fan blades.
WL-WC5 65 60% Deloro60+40% casting WC Screw propeller and conveyance shaft.
WL-WC6 62 70% Deloro60+30% casting WC Screw propeller and conveyance shaft.
WL-WC7 62 65%Ni60 +35% WC Fan blades, screw propeller etc.
MH-NiWc (A)
(Melting)
65 65%Ni+35%W Ball valves, the compressor shaft seal pump, Lasita round, pump parts, etc.
MH-NiWc (B)
( Melting)
65 65%Ni+35%W C Valve, guide lever, components of laminated paper roll pump, wear resistant ring etc.
© Copyright 2017 Taizhou Wanglong Machinery Co., Ltd. All Rights Reserved.
Sales QQ
E-mail
Skype
Top